Septic Solutions® offers and extensive line of septic tank risers and lids from Polylok. Polylok risers and lids are manufacturered from High Density Polyethylene (HDPE) and are one of the strongest on the market today. These septic tank risers offer great flexibility when bringing septic tank access to grade. Each riser and cover comes with a factory installed gasket to ensure watertight and airtight connections.

Polylok Septic Tank Riser Lids

The Polylok septic tank riser lids will fit only Polylok septic tank risers or adapter rings. The cover locks into position and is fastened with included stainless steel screws.

12'' PolyLok Lid
#3017-C
PL-12RC

$19.95
Quantity:

20'' PolyLok Lid
#3009-RC
PL-20RC

$26.00
Quantity:
24'' PolyLok Lid
#3008-RC
PL-24RC

$35.00
Quantity:

Polylok Heavy Duty Septic Tank Riser Lids

Watertight and Airtight!

Fits securely on a Polylok riser.  The 24" will also fit on corrugated pipe.  Highest UV Package on the market today!  These heavy duty covers were tested at an outside laboratory and passed standard static load testing to 5000 lbs., as well as center and off center impact load testing to 150 ft lbs.

Both the 20" and 24" lids are rated at 1,000 lbs.

20'' Polylok Heavy Duty Lid
#3017-C20

$39.50
Quantity:

24'' Polylok Heavy Duty Lid
#3008-WEST

$49.00
Quantity:

20'' Polylok Heavy Duty Lids

20'' TecHnical Specifications

 

24'' Polylok Heavy Duty Lids

24'' Technical Specifications

6'' Tall Polylok Septic Tank Risers

Green. Used to raise the height of your septic system lid. Easily STACKABLE! Can be adapted to anything from a septic tank to an aerobic system. Each riser has two knockouts for electrical connections. Measurements are inside diameter

12'' x 6'' Riser
#3017-R

$19.95
Quantity:
20'' x 6'' Riser
#3009

$26.00
Quantity:
24'' x 6'' Riser
#3008

$35.00
Quantity:

Technical Specifications

Polylok 6'' Tall Risers

•All Polylok Risers and Lids are 
Frost Proof, Watertight, and Gastight!

12'' Tall Polylok Septic Tank Risers

Green. Used to raise the height of your septic system lid. Easily STACKABLE! It has the same high quality as the 6" tall risers but with fewer screws you have to put together. Structural ribs inside prevent frost from adhering to the riser in frost prone areas. These 12" tall risers also accept 2", 3", 4" and corrugated pipe.  Measurements are inside diameter.

20'' x 12'' PolyLok Riser
3009-R12

$46.00
Quantity:
24''x12'' PolyLok Riser
3008-R12

$59.00
Quantity:
Polylok 12'' Tall Risers

Polylok Safety Screens

New Polylok 20” & 24” safety screens available. They act as a secondary layer of protection if the riser cover was unknowingly damaged or removed. The screen fits in the upper most Riser stack of the Polylok Risers and prevents entry into the septic tank.

  • Built in Handle
  • Tested at 250 lbs. per sq. ft.
  • Sits inside the top Riser of the Riser stack
  • Comes in bright yellow for safety

Highly Recommended

20'' PolyLok
Safety Screen
#3009-SS

$17.50
Quantity:
24'' PolyLok
Safety Screen
#3008-SS

$19.50
Quantity:

Polylok Safety Screens


Polylok Round Adapter Ring

Round Adapter for either 20" or 24" risers. This ring allows you to mount the Polylok risers to a concrete or plastic septic tank. The risers simply attach with screws to this adapter ring

20'' Polylok
Round Adapter Ring
#3009-RTR20

$26.00
Quantity:
24'' Polylok
Round Adapter Ring
#3009-RTR24

$28.00
Quantity:

Polylok Round Adapter Ring

Polylok SQuare Tank Adapter Ring

Adapter for either 20" or 24" risers. Covers up to 25" square opening or up to a 27" round opening. This ring allows you to mount the risers to the septic tank.  Very Easy. The risers simply attach with screws to this adapter ring

PolyLok Riser Adapter Ring
#3009-AR

$49.00
Quantity:

Adapter Ring Installation

Polylok Square Tank Adapter Ring


Technical Specifications

Butyl Sealant Rope

Used to seal Tuf-Tite tank adapter 
ring to concrete septic tank.
5/16" Round - 20' per roll 

#ASTM-C990 
$7.95

Quantity:

5/16" Round - 20' per roll 

Adapter Ring Installation Anchor Kit

Recommended

Includes drill bit, concrete anchors, bolts, and butyl sealant rope.
This is the best way to mount riser adapter ring to septic tank.

#ANCHORKIT
$19.50

Quantity: